Visual Warning Aircraft Warning Sphere For Electricity Transmission Line
A marking sphere should be of one color such as aviation orange, white and red. Generally, the marking spheres are placed on the high pressure line. Where there is more than one line at the highest level, white and red, or white and orange spheres should be displayed alternately. This alternating color scheme provides the most conspicuity against all background.
Datasheet: AH-AW-S Aircraft Warning Sphere.pdf
Product Application
Used for High-rise transimission lines,Transmission cables, river-crossing transmission lines.
Installing procedure
1. At the mount point on the alerting ball, wrap cable protecting bars round cables for 1000-1200mm long, with two ends of protecting bars extending 200-300mm beyond the surface of the ball.
2. Fix the plastic wires which are mounted on lower hemisphere of the ball onto the cables and twist them.
3. Combine the lower hemisphere with the upper hemisphere according to module codes. Turn the hemisphere during the assembly and make sure two hemispheres are joined into position .
4. Insert stainless steel bolt(M12*35) and then put flat washers and spring washers around each bolt. Tighten each nut at last.
Packaging & Delivery time
Packaging: Plastic bag with paper carton.
Delivery: In 2-30 days after payment.
Product Descripton
Description | Parameter |
Compliance | ICAO(Aerodromes Annex 14) |
Length of Diameter | Φ600mm |
Available Color | Orange, Red, White etc. |
Material | Fiber glass reinforced polyester resin |
Character of fiber glass | -Tensile strength≥128Mpa -Bending strength≥230Mpa -Temperature resistant: 40℃~90℃ |
Fastening piece | Aluminum material, M10 by 35, M10 by 40 |
Net weight | 6.3Kg |
Dimension Drawing
Product Picture
Contact Us at Any Time