White High-intensity Type A LED Aviation Obstruction Light for Tele Tower
Specification
• The house of the light adopts Aluminium alloy, Lens of Tempered glass; the structure is high strength,
resistance to corrosion
• Use the optical design of parabolic reflector, the visual range further and angle more accurate.
• Light source adopts high quality LED which are light efficiency 100LM/W, low power consumption, long
lifespan up to flash 100,000 Hrs
• Based on the single chip computer control, automatic identification sync signal, do not distinguish the main
light and auxiliary light, and also could be controlled by controller.
• Same power supply voltage with synchronous signal, integrate in power supply cable, emliminate the damage
by error installation caused.
• Used the photosensitive probe fit for the natural light spectrum curve, automatic control light intensity level.
• The circuit of the light has surge protection whose lightning proof ability is In 7.5KA/5 times, Imax 15KA so that
the light is suitable to harsh environment.
• Integral structure, protection lever of IP65.
• Ignitability rate UL-94V0, fit for all kinds of industrial situation .
• GPS synchronizing function is available.
Detail Description
Single light with photocell, so it can work all day and automatically change light intensity according to ambient brightness by photocell. When ambient brightness is less than 50cd/m2,light intensity is
2,000cd(±25%);When ambient brightness is between 50cd/m2 and 500cd/m2,light intensity is 20,000cd(±25%) ;When ambient brightness is more than 500cd/m2,light intensity is 200,000cd(±25%). All control signal wire of light is paralleled to make several lights flash synchronously.
Application:
This product is mainly used on the top of Television transmitting tower, High-rise building, High chimney, cable stayed bridge,,communications Tower, Cooling tower, etc which height is over 150meter so that it can play a warning role in potentially hazardous obstructions to air traffic flashing white safety light.
Specifications:
| SPECIFICATIONS | AH-HI/O High-intensity Type A Aviation Obstruction Light |
| Light Characteristics | |
| Light Source | LED |
| Available Colors | White |
| Intensity(cd) | -2,000cd (Night)
-20,000cd (Twilight)
-200,000cd(Daytime) |
| Horizontal Output(degrees) | 360 |
| Vertical Divergence(degrees) | 3 to 7 |
| Reflector Type | Fresnel Lens |
| Flash Characteristics | (40-60times/minute) |
| Operation Mode | Dusk-to-dawn Automatically as standard. |
| LED Life Experience(hours) | >100,000 |
| Electrical Characteristics | |
| Operating Voltage | AC220V (option
voltage,eg.AC120V,AC110V,DC48V) |
| Power(W) | 150 |
| Circuit Protection | integrated |
| Temperature Range(℃) | -55~70 |
| Physical Characteristics | |
| Body Material | High borosilicate glass |
| Base Material | die casting aluminum |
| Mounting | 180 by 180 by Φ12 |
| Height(mm) | 256 |
| Width(mm) | 256 |
| Depth(mm) | 440 |
| Mass(kg) | 23 |
| Environmental Factors | |
| Humidity | 10%-%95 |
| Waterproof | IP67 |
| Compliance | |
| ICAO | High-intensity Type A Aviation
Obstruction Light, ICAO Annex 14 Volume
1,'Aerodrome Design and Operations’
Forth edition July 2004,table6.3 |
| FAA | High-intensity Type A FAA L-856 |
Dimension Drawing
Product Picture
Your message must be between 20-3,000 characters!
