Inset LED Heliport Light Steady Burning For Touchdown / Lift Off Area Lighting FATO

AH-HP-I Serial LED Heliport Inset Light

Heliport Inset light is always be installed at locations where the lights are frequently knocked down by aircraft or maintenance vehicles.

It could be used as Aiming point light, perimeter light of FATO(Final approach and take-off areas), TLOF (Touchdown and lift-off areas), taxiway, Flight path alignment guidance lighting, etc. The emitting color is green or yellow or white or blue.

8inch International standard mounting for aerodrome inset light.

Compliance

ICAO Annex 14 Volume ǁ Heliports 5.3.

FAA AC 150/5390-2B Heliport Design Guide

CAAC MH 5001—2013 Aerodrome technical standards

CAAC MH 5013—2014 Technical Standards of Civil Heliports

Features

Electrical

Ultra high intensity CREE LED as light source saving power consumption and maintenance, 95% less power than equivalent incandescent light

Power supply available in AC(110-240VAC), DC48V

Physical

Pressure resistance lens allowed the vehicles go through on light

Die-casting aluminum covered by color powder coasted which have good corrosion protection and load bearing.

IP68 waterproof ensure light work fine underground

Optional

Infrared LED for pilot using NVG(Night Vision Goggles)

Controller for power supplying and turn ON/OFF light

VHF pilot to ground remote control

Light intensity adjustable

Application

Helipad/Heliport TLOF areas

Heliport FATO ares

Helipad Runway

Helipad taxiway

Aiming point light

heliport taxiway light
heliport tlof light
icao helipad lighting
airfield taxiway light
heliport aiming point lights
area edge light
helicopter taxiway edge light
apron edge light
helipad inset light
touchdown and liftoff