Steady Burning CREE LED Helipad Approach Light Aluminum Body FATO Lights
Product Details
| Light Source: | LED | Emitting Color: | White |
|---|---|---|---|
| Operating Voltage: | 110-240VAC | Body Material: | Die-casting Aluminum |
| Weight(kg): | 4 | Waterproof: | IP68 |
| Highlight |
CREE LED Helipad Approach Light,Steady Burning Helipad Approach Light,Aluminum Body FATO Lights |
||
Product Description
AH-HP-I-FATO(L) LED Heliport Final Approach and Take-off Area Lighting
The objective of a FATO lighting system for onshore surface-level heliports is to provide to the pilot operating at night an indication of the shape, location and extent of the FATO. FATO lights shall be placed along the edges of the FATO and be fixed omnidirectional lights showing white.
8inch International standard mounting for aerodrome inset light.
Compliance
ICAO Annex 14 Volume ǁ Heliports 5.3.7
CAAC MH 5001-2013 Aerodrome technical standards
CAAC MH 5013-2014 Technical Standards of Civil Heliports
Features
Electrical
Ultra high intensity CREE LED as light source saving power consumption and maintenance, 95% less power than equivalent incandescent light
Physical
Pressure resistance lens allowed the vehicles go through on light
Die-casting aluminum covered by color powder coasted which have good corrosion protection and load bearing.
Optional
Infrared LED for pilot using NVG (Night Vision Goggles)
Controller for power supplying and turn ON/OFF light
VHF pilot to ground remote control
Application
Surface-level heliport
Elevated heliport or helideck
Airport light
Heliport lighting
Airfield light
Helipad lights
Airport light
Led heliport inset light
FATO light
Product Highlights
AH-HP-I-FATO(L) LED Heliport Final Approach and Take-off Area Lighting The objective of a FATO lighting system for onshore surface-level heliports is to provide to the pilot operating at night an indication of the shape, location and extent of the FATO. FATO lights shall be placed along the edges of ...
120lm/W Heliport LED Flood Light White Color 110-240VAC Steady Burning
LED Surface Heliport Flood Light is used for illuminate the whole heliport area at night. It is specially designed for helipads, providing glare-free, uniform surface lighting for landing and loading activities. LED Surface Floodlights improve pilot depth perception by reflecting the surface of the ...
IP66 HAPI Polycarbonate 9000cd Helipad Landing Lights
The Helicopter Approach Path Indicator - HAPI system consists of a single lighting to provide a visual indication of the correct approaching path of the helicopter. The HAPI uses patented, LED-based optics to achieve the lowest power consumption, highest intensity and sharpest green/red transition. ...
FATO Solar Airfield Light Steady Burning Runway Edge Light White Blue Red Green Colors
AH-SA-A Serial Solar Airfield Light AH-SA-A Serial Solar Airfield Light is specially used on permanent airport/heliport where cable power is not convenient or temporary airdrome. It could be used as Runway Edge Light, Taxiway Light, Threshold/End Light, Heliport Beacon, Low intensity Aviation ...
Double Obstruction Aircraft Warning Light Low Intensity L810 Aviation
AH-LI-B2 LED Low-intensity L810 Double Aviation Obstruction Light Application AH-LI-B2 low-intensity light could be used alone on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the height is lower than ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
