FAA Aiming Helipad Landing Lights Die Casting Aluminum Base Material Helideck Beacon Lamp
Product Details
| Horizontal Output(degrees): | 360 | Vertical Divergence(degrees): | ≥10 |
|---|---|---|---|
| Flash Characteristics: | 4 Quick Flashes In 0.8s, Off 1.2s(Morse Code “H”) | Operation Mode: | 24hours Operation |
| LED Life Experience(hours): | >100,000 | Operating Voltage: | 12 |
| Circuit Protection: | Integrated | ||
| Highlight |
portfolio landscape lighting,perimeter lighting products |
||
Product Description
This heliport beacon light should be provided at a heliport where long-range visual guidance is considered necessary and is not provided by other visual means; or identification of the heliport is difficult due to surrounding lights. The heliport beacon shall be located on or adjacent to the heliport preferably at an elevated position and so that it does not dazzle a pilot at short range.
AH-HP-B1 flashes white color 4 times/0.8second and stop for 1.2s, then start new circle for 2seconds(0.8s+1.2s ). Fully meet your needs.
Compliance
** ICAO Annex 14 Volume ǁ Heliports 5.3.2
** FAA AC 150/5390-2B Heliport Design Guide
** CAP 437
Electrical
LED as light source saving power consumption and maintenance, 95% less power than equivalent incandescent light
Power supply available in DC(12-48VDC) or AC(110-240VAC)
Physical
* Clear polycarbonate lens for converging light and also provides corrosion resistance and UV protection.
* UV protection Powder coated bright yellow color base make better visibility
* Base material is die casting aluminum which has strong corrosion resistance, Shock and Vibrations protection
Optional
► Controller for power supplying and turn ON/OFF light
► VHF pilot to ground remote control
Application
Helipad/Heliport/Helideck
More product parameter:
| Light Source | LED |
| Intensity(cd) | ≥2500cd |
| Power(watts) | 12 |
| Body Material | UV protected Polycarbonate |
| Base Material | Powder-coated Die-casting aluminum |
| Overall Size (mm) | 220*220*233 |
| Mounting | 190×190×12 |
| Ambient Temperature(℃) | -35~80 |
| Humidity | 0~95% |
| Wind Speed | 80m/s |
| Waterproof | IP65 |
| Operating Voltage | DC(12-48VDC) or AC(110-240VAC) |
| Operation Mode | 24hours operation |
| ICAO | ICAO Annex 14 Volume ǁ Heliports 5.3.2 |
Online communication:
Delivery:
We will try our best to help every customer also provide professional technical support. If you have any question,feel free to contact me. We have more than 8 years manufacturing experience for clients from whole world
Product Highlights
This heliport beacon light should be provided at a heliport where long-range visual guidance is considered necessary and is not provided by other visual means; or identification of the heliport is difficult due to surrounding lights. The heliport beacon shall be located on or adjacent to the ...
120lm/W Heliport LED Flood Light White Color 110-240VAC Steady Burning
LED Surface Heliport Flood Light is used for illuminate the whole heliport area at night. It is specially designed for helipads, providing glare-free, uniform surface lighting for landing and loading activities. LED Surface Floodlights improve pilot depth perception by reflecting the surface of the ...
IP66 HAPI Polycarbonate 9000cd Helipad Landing Lights
The Helicopter Approach Path Indicator - HAPI system consists of a single lighting to provide a visual indication of the correct approaching path of the helicopter. The HAPI uses patented, LED-based optics to achieve the lowest power consumption, highest intensity and sharpest green/red transition. ...
FATO Solar Airfield Light Steady Burning Runway Edge Light White Blue Red Green Colors
AH-SA-A Serial Solar Airfield Light AH-SA-A Serial Solar Airfield Light is specially used on permanent airport/heliport where cable power is not convenient or temporary airdrome. It could be used as Runway Edge Light, Taxiway Light, Threshold/End Light, Heliport Beacon, Low intensity Aviation ...
Double Obstruction Aircraft Warning Light Low Intensity L810 Aviation
AH-LI-B2 LED Low-intensity L810 Double Aviation Obstruction Light Application AH-LI-B2 low-intensity light could be used alone on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the height is lower than ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
