IP66 Green/Red LED Helicopter Approach Path Indicator HAPI Helipad Approach Light
Product Details
| Product Name: | AH-HP-HAPI Helicopter Approach Path Indicator (HAPI) | Light Source: | LED |
|---|---|---|---|
| Available Colors: | Green/Red | Photometry: | Compliant With ICAO Annex 14 Volume II |
| Operating Voltage: | 220VAC, 110vac, 48VDC, 24VDC | Body Material: | UV Protected Polycarbonate |
| Base Material: | Powder-coated Die-casting Aluminum | Product Life Expectancy: | ≥10 Years |
| Ambient Temperature(℃): | -35~80 | Humidity: | 10~90% |
| Wind Speed: | 80m/s | Waterproof: | IP66 |
| Highlight |
Polycarbonate Helipad Landing Lights,9000cd Helipad Landing Lights,IP66 Helicopter Approach Path Indicator |
||
Product Description
The Helicopter Approach Path Indicator (HAPI) system consists of a single lighting unit that provides a visual indication of the correct approach path for helicopters.
The HAPI uses patented, LED-based optics to achieve the lowest power consumption, highest intensity, and the sharpest green/red transition available.
- ICAO Annex 14 Volume II — Figure 5-11
- FAA AC 150/5390-2B Heliport Design Guide
- CAP 437
The HAPI module contains a lens system that divides the emitted light into four distinct segments, giving the pilot a clear visual cue relative to the optimal approach slope:
- Flashing Green Light — Helicopter is above the optimal approach slope (too high).
- Fixed Green Light — Helicopter is on the correct slope.
- Fixed Red Light — Helicopter is slightly below the optimal slope (slightly too low).
- Flashing Red Light — Helicopter is below the optimal slope (too low).
Depending on the pilot’s viewing angle relative to the system, only one of the four signals — flashing green, fixed green, fixed red, or flashing red — is visible at any given time.
The signal repetition rate of the flashing sectors is greater than 2 Hz. In accordance with ICAO, the HAPI can be adjusted in elevation to any desired angle between 1° and 12° above the horizontal, with an accuracy of ±5 minutes of arc. The system automatically switches off when the vertical misalignment of a unit exceeds ±0.5° (±30 minutes).
- Helipads, heliports, and helidecks
- Permanent and temporary helipads
- Emergency and hospital helipads
- Remote helipads
- NVG (Night Vision Goggle) operations
| Parameter | Specification |
|---|---|
| Light Characteristics | |
| Light Source | LED |
| Available Colors | Green / Red |
| Photometry | Compliant with ICAO Annex 14 Volume II |
| Working Mode | Steady burning + Flashing |
| Operation Mode | 24-hour operation |
| LED Life Expectancy | >100,000 hours |
| Electrical Characteristics | |
| Operating Voltage | AC 220V |
| Power | 50 W |
| Circuit Protection | Integrated |
| Physical Characteristics | |
| Body Material | UV-protected polycarbonate |
| Base Material | Powder-coated die-casting aluminum |
| Mounting | 140 × M10 |
| Dimensions (mm) | 455 × 520 × 184 |
| Weight | 10 kg |
| Product Life Expectancy | ≥10 years |
| Environmental Factors | |
| Ambient Temperature | -35°C to +80°C |
| Humidity | 10–90% |
| Wind Speed | 80 m/s |
| Waterproof Rating | IP66 |
| Compliance | |
| ICAO | ICAO Annex 14 Volume II — Figure 5-11 |
| FAA | FAA AC 150/5390-2B Heliport Design Guide |
Product Highlights
IP66 HAPI with patented LED optics for lowest power, highest intensity, and sharpest green/red transition. ICAO/FAA compliant, ≥10-year life, 80m/s wind resistance. Options: solar, NVG IR, remote control.
120lm/W Heliport LED Flood Light White Color 110-240VAC Steady Burning
LED Surface Heliport Flood Light is used for illuminate the whole heliport area at night. It is specially designed for helipads, providing glare-free, uniform surface lighting for landing and loading activities. LED Surface Floodlights improve pilot depth perception by reflecting the surface of the ...
IP66 Green/Red LED Helicopter Approach Path Indicator HAPI Helipad Approach Light
IP66 HAPI with patented LED optics for lowest power, highest intensity, and sharpest green/red transition. ICAO/FAA compliant, ≥10-year life, 80m/s wind resistance. Options: solar, NVG IR, remote control.
FATO Solar Airfield Light Steady Burning Runway Edge Light White Blue Red Green Colors
AH-SA-A Serial Solar Airfield Light AH-SA-A Serial Solar Airfield Light is specially used on permanent airport/heliport where cable power is not convenient or temporary airdrome. It could be used as Runway Edge Light, Taxiway Light, Threshold/End Light, Heliport Beacon, Low intensity Aviation ...
Double Obstruction Aircraft Warning Light Low Intensity L810 Aviation
AH-LI-B2 LED Low-intensity L810 Double Aviation Obstruction Light Application AH-LI-B2 low-intensity light could be used alone on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the height is lower than ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
